
4217011251, 421-70-11251 Bushing Komatsu
Description
This Komatsu 4217011251 bushing is a cylindrical plain bearing that lines a bore and gives a pivot pin a low-friction, replaceable surface to turn in. It is also written 421-70-11251. Where it works The bushing sits in a pin joint, between the pin and the housing around it. It carries the radial load, sets the running clearance of the joint, and wears so the housing does not. The part weighs 2.27 kg. Signs it needs replacing Slop in the joint, which means the bore has worn oval and the clearance has grown. Scoring or seizure marks, usually from poor lubrication or dirt getting in. Uneven wear along one edge, which points to a misaligned pin or a bushing pressed in out of round. Fretting or corrosion at the press-fit surface. Replacing it Check the clearance and scoring at scheduled service, and keep the grease path open and the seals intact. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit. Changing the bushing on its own leaves a worn pin chewing through the new one.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send to check the fit before ordering?
Send the part number from your old bushing and the machine's serial number, and we will check them against 4217011251.