Marketplace of Heavy Machinery Spare Parts

55035604, 550 356 04 Bearing Bushing Sandvik

$1,678.00
Brand: Sandvik
Category: PIN & Bushing
Part Number: 550 356 04
Availability: In Stock
A Sandvik bearing bushing that sits in the bore of a pin joint and takes the wear so the pin and housing do not.

Description

The Sandvik 55035604 bearing bushing is a cylindrical plain bearing that lines a bore and gives a pivot pin a replaceable, low-friction wear surface. It is also written 550 356 04, and it weighs 3 kg. What it does in the joint The bushing carries the radial load while the pin turns or slides inside it. It also sets the running clearance of the joint. It is built to wear so that the more expensive pin and housing do not. Signs it needs replacing Slop in the joint: the bore has worn oval and the pin moves more than it should. Scoring or seizure: usually a sign of poor lubrication or dirt getting in. Uneven wear on one edge: the pin is misaligned, or the bushing was pressed in out of round. Fretting or corrosion at the press-fit: the bushing no longer sits tight in its bore. Fitting notes Keep the grease path clear and the seals that hold the lubricant in place intact. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit. A new bushing on a worn pin wears out fast. Send us the number stamped on your old bushing and your machine's serial number, and we will check it against this one.

Frequently Asked Questions

How long does shipping take?

Shipping is free and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.

Loading product...

Related Products