
55052181, 550 521 81 Bushing Sandvik
Description
The 55052181 bushing from Sandvik is a cylindrical plain bearing that lines a bore and gives a pin a replaceable, low-friction wear surface to turn or slide in. What it does at the joint The bushing carries the load from the pin and takes the wear itself, which protects the host component it sits in from wearing. It also sets the running clearance of the joint. It weighs 3.0 kg. Signs it needs replacing Slop in the joint, which comes from the bore wearing oval and growing in clearance Scoring or seizure marks, usually from poor lubrication or dirt getting in Uneven wear at the edges, which points to a misaligned pin or a bushing pressed in out of round Fretting or corrosion where the bushing sits in its press fit Fitting it Keep the grease path clear and the seals that hold the lubricant in place intact. Replace the bushing together with its pin once clearance goes past the equipment maker's wear limit, not on its own, because a new bushing on a worn pin wears out quickly.
Frequently Asked Questions
How long does shipping take and does it cost anything?
Shipping is free on every order and every order ships with tracking. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door.
What should I send you to check this bushing against my old one?
Send us the number 55052181 along with the machine's serial number. That lets us confirm the match before you order.