Marketplace of Heavy Machinery Spare Parts

56027360, 560 273 60 Pin Sandvik

$760.00
Brand: Sandvik
Category: Pin & Bushing
Part Number: 560 273 60
Availability: In Stock
Replaces a worn pivot pin in a bushed joint, taking the shear load while the linkage swings.

Description

The Sandvik 56027360 pin is a hardened cylindrical shaft that forms the axis of a pinned joint, also written 560 273 60. It weighs 2 kg. What it does in the joint The pin runs inside a bushing and carries shear load between the two linkage members while they pivot. It is normally hardened and ground so that wear ends up in the cheaper bushing, not in the pin. Signs it needs replacing Scoring or surface wear that opens up the joint clearance Bending, or shear fatigue after shock loading Corrosion and pitting where the surface layer has broken through Worn keeper plates or snap rings that let the pin walk out Service notes At service, check the pin for scoring, ovality and straightness, and keep the joint greased and the retaining hardware in good order. Replace the pin together with its mating bushing once either one is past its wear limit, because a new pin in a worn bushing wears out quickly. Send us the machine's serial number and the number on the old pin, and we will confirm the match before you order.

Frequently Asked Questions

How long does shipping take and does it cost anything?

Shipping is free on every order. Orders are prepared in 1–2 days and in transit 4–5 days, typically 5–7 days door-to-door, and every order ships with tracking.

Loading product...

Related Products