164-1067 GLASS CATERPILLAR (1641067) Cabin Door Window Panel

If you’re replacing damaged or scratched cab glazing on your backhoe loader, 164-1067 GLASS CATERPILLAR is built to restore visibility, cab sealing, and operator comfort without the fitment headaches that come from “close-enough” glass. At 3GEN Export, we supply OEM-grade replacement parts and ship worldwide in 5 working days, so you can get your machine back on the job fast.

From the images you shared, this panel is a formed/contoured cab door glass with a factory-style perimeter edge and mounting/locator points—exactly the kind of part that must match the cab frame geometry and hardware alignment to avoid wind noise, water entry, and stress cracks.

What 164-1067 GLASS CATERPILLAR is used for

164-1067 GLASS CATERPILLAR is commonly referenced as a left-hand door glass for CAT D-Series backhoe loaders. Its job is simple but critical:

• Provide a clear, safe viewing area for trenching, loading, roading, and tight-site maneuvering

• Protect the operator from dust, flying debris, weather, and pressure washing splashback

• Maintain cab pressure/ventilation performance (especially when HVAC is working hard)

• Support correct door closure feel (no binding, rattling, or “hard close” issues)

Because 164-1067 GLASS CATERPILLAR sits in a high-vibration environment, the correct thickness, edge finishing, and hole positioning matter as much as “overall size.”

Key construction features you should expect

When you source 164-1067 GLASS CATERPILLAR, you want a panel that behaves like the factory-fit glass in real working conditions:

Safety glass build (tempered/laminated, application-specific)

Cab glazing is typically produced as safety glass so that, in the event of impact, it reduces injury risk compared to standard glass. The correct safety-glass type depends on the cab design and application requirements. What matters for you as a buyer is that 164-1067 GLASS CATERPILLAR should be safety-rated and produced for heavy equipment cab use (not generic architectural glazing).

Proper thickness and hole layout

Multiple industry listings for this part call out 5.0 mm thickness and a 6-hole configuration.

That’s important because:

• Too thin: higher vibration sensitivity and easier edge chipping

• Too thick: fitment problems in the seal channel and door frame

• Wrong hole spacing: hardware misalignment and stress points that shorten service life

Edge finishing and contour accuracy

Your images show a shaped panel with controlled curvature/contour. On heavy machinery, the wrong contour often shows up as:

• Door seal “walking” out of position

• Small air gaps that turn into loud wind noise at travel speed

• Stress cracks starting near corners or holes after repeated slams/vibration

That’s why 164-1067 GLASS CATERPILLAR should be produced with consistent edge finishing and correct form to match the cab frame.

Technical details and specifications

Below is a practical spec overview for 164-1067 GLASS CATERPILLAR based on widely listed market references for the same part number:

Dimensions (common listing)

Several suppliers list the glass size at approximately 44″ × 31″ (about 1118 mm × 787 mm).

Because this is a shaped panel, those numbers are best treated as bounding dimensions (overall envelope) rather than a perfect rectangle measurement.

Thickness and configuration

• Thickness: 5.00 mm

• Configuration: Flat/formed application, 6-hole style listing

Approximate weight

A common listing shows a glass weight around 21 lb, which is approximately 9.5 kg (glass only; packaging can add more).

So, for your product page, a safe practical entry is:

• Weight (approx.): 9.5 kg

Compatibility: which machines commonly use 164-1067 GLASS CATERPILLAR

Market listings most commonly associate 164-1067 GLASS CATERPILLAR with CAT D-Series backhoe loaders, often described as left-hand door glass.

Frequently referenced fitment examples include:

• 416D

• 424D

• 428D

• 432D

• 442D

• 446D

• 438D (often included in D-Series lists)

• CAT ( 416, 420, 424, 428, 430, 432, 438, 442, 446 D )

Because backhoe loader cabs can vary by arrangement, year range, and door hardware, the most reliable method is always: match your machine arrangement + door type + part number before purchase. If you send 3GEN Export your serial prefix or arrangement number, we can help you confirm the correct glazing.

Why replacing 164-1067 GLASS CATERPILLAR on time saves money

Putting off damaged cab glass often costs more than the panel itself. Here’s what typically happens in the field:

Small chips become cracks under vibration

Backhoe loaders vibrate continuously—transport, stabilizer deployment, loader work, and road travel all flex the cab structure. A small edge chip can spread into a long crack, and once the crack crosses a stress line or mounting region, the glass is no longer dependable.

Water ingress destroys interior components

A tiny seal gap around 164-1067 GLASS CATERPILLAR can send water onto:

• door switches and harness points

• interior trim and insulation

• cab air filters and HVAC ducts

Over time, this becomes electrical troubleshooting and odor/mold cleanup—both expensive downtime.

Visibility issues raise safety risk

Scratches and haze turn sunlight and work lights into glare, especially in dust-heavy rock and quarry environments. A clean, properly sealed 164-1067 GLASS CATERPILLAR restores confident sightlines at trench edges, around pedestrians, and near traffic control.

Installation guide for 164-1067 GLASS CATERPILLAR

Below is a jobsite-friendly approach that reduces breakage risk. (Exact steps vary by cab design and seal type.)

Before you start

• Park on level ground, lower the bucket, apply parking brake

• Remove interior door trim carefully to avoid breaking clips

• Inspect the seal channel and hardware points for corrosion or burrs

Removal tips

1. Support the old panel so it cannot drop or twist

2. If the glass is cracked, tape it in multiple directions to control fragments

3. Remove retainers/hardware in the correct order (top to bottom is often safest)

4. Clean the seal channel fully—dirt here is a major cause of “won’t seat” problems

Installing the new glass

1. Dry-fit 164-1067 GLASS CATERPILLAR first to confirm alignment of corners and holes

2. Install with the correct seal and setting materials recommended for cab glazing

3. Avoid over-tightening any clamps/retainers—glass needs firm support, not compression stress

4. Close the door slowly the first few times, checking seal contact and latch feel

After installation checks

• Spray test with water (light pressure) to confirm no leaks

• Listen for wind noise on a short travel test

• Re-check fasteners after the first workday (vibration can settle components)

Buying checklist: how to confirm you’re getting the right 164-1067 GLASS CATERPILLAR

Use this checklist to prevent mismatches:

• Confirm the part number: 164-1067 and search variant 1641067

• Confirm door side: commonly sold as left-hand door glass

• Verify approximate size envelope: about 44″ × 31″

• Confirm thickness: 5.00 mm and 6-hole style listing

• Confirm machine family: CAT D-Series backhoe loader models listed above

If anything differs (different door frame, different number of holes, different seal type), it may be a different glazing variant.

Why 3GEN Export for 164-1067 GLASS CATERPILLAR

When you order 164-1067 GLASS CATERPILLAR from 3GEN Export, you’re not just buying glass—you’re buying a supply process built for uptime:

• OEM-grade sourcing standards for heavy machinery applications

• Packaging focus to reduce transit damage risk for glass shipments

• Worldwide delivery in 5 working days (where carrier lanes allow)

• Fast quotation and part verification support using your machine details

If you want, send the machine model + serial prefix and we’ll help confirm whether 164-1067 GLASS CATERPILLARis the correct match before you publish the listing or place bulk orders.

Manufactured in Turkey, these products are made using the latest technologies and built to meet the highest international standards. Each machine is a high-quality copy of the original, ensuring durability, precision, and performance that you can rely on for modern construction and metalworking projects.